...
>
Prüfen-Finger-Sonde
(54)
Verbundene Prüfen-Finger-Sonde
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:Jointed Test Finger Probe, 25mm Test Finger Probe, Jointed Test Finger
Jointed Test Finger Product Details material: metal, except where otherwise specified linear dimensions in milimeters tolerance on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to 25mm: 0/-0.05 over 25mm: +/-0.2 both joints shall permit movement in the same plane ... Mehr sehen
➤ Besuch Webseite
UL1310 Zugänglichkeits-Sonde des Abb. 16,4-S3252 zu den gefährlichen beweglichen Teilen
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:UL1310 Accessibility Probe, S3252 Accessibility Probe, UL1310 Testing Accessibility
UL1310 Fig.16.4 Accessibility Probe Testing Accessibility To Hazardous Moving Parts Product details: It conforms to standard requirement of UL1310 Fig 16.4(S3252). It is used for testing accessibility to hazardous moving parts such as access to fan blades through a fan finger guard. The handle is ny... Mehr sehen
➤ Besuch Webseite
Ф10mm-Griff-Prüfen Rod For Prüfening Concealment Of die Reset-Taste
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:Ф10mm Testing Rod, IEC 60335 Testing Rod, Ф10mm Terminal Probe
IEC 60335-2-16 Clause 22.102 Test Rod For Testing Concealment Of The Reset Button Of A Protective Device. Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of the reset button of a protective device. Applian... Mehr sehen
➤ Besuch Webseite
Prüfungssonde Iecs 60065 4.0mm für das Überprüfen von gefährlichem Live Parts
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:4.0mm Testing Probe, IEC 60065 Testing Probe, 4.0mm Testing Equipment
IEC60065 4.0mm Probe For Verifying Protection Against Access To Hazardous Parts Through Top Openin Product Details 4.0mm Hazardous Live Parts Probe Product information: This testing probe is used to verify the protection against access to hazardous parts through top openings. It meets IEC, EN, UL an... Mehr sehen
➤ Besuch Webseite
Prüfen-Sonden UL982 PA190 für Elektrodenart Heizungsanlagen
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:PA190 Test Probes, PA190 UL Finger Probe, UL982 Test Probes
UL982-2006 Figure 58.5(PA190) Test Probe For Protection Test Of Portable Electrode-Type Heating Appliances Product details: It conforms to the standard of UL499 Fig 6.4 and UL982-2006 Fig 58.5(PA190). It is applicable for the electrical equipment. The handle is made of Nylon, and the tip is stainles... Mehr sehen
➤ Besuch Webseite
BS-en 13126 5 Prüfmanometer für die Windows-Drossel-Sicherheits-Prüfung
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:BS EN 13126 5 Test Gauges, 100mm Test Gauges, UL Finger Probe Test
BS EN 13126 - 5 Figure A.2 Test Gauges For Windows Restrictor Safety Testing Product information: Test gauges for Windows Restrictor safety testing. 2 pieces a set, gauge A 100mm, gauge B 89mm. Conforms to BS EN 13126-5 (Figure A.2). Material: Made of Nylon. We are a professional manufacturer of saf... Mehr sehen
➤ Besuch Webseite
Abbildung 16-Prüfen Thorn Probe 14 Iecs 61032 für das Überprüfen des Schutzes
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:IEC 61032 Test Thorn Probe, Ф30mm Test Thorn Probe, IEC 61032 Test Probe 41
IEC61032 Figure 16 Test Probe 41 Test Thorn Probe For Verifying Protection Against Access To Glowing Heating Elements Product information: The test thorn probe is intended to verify the protection against access to glowing heating elements. It complies with IEC61032 figure 16 Test probe 41, IEC60335... Mehr sehen
➤ Besuch Webseite
IEC60529 IP3X Iec 61032 1 Abbildung 3-Prüfen Rod Probe For Mechanical Parts
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:IEC60529 Test Rod Probe, IP3X Test Rod Probe, IP3X Long Test Probes
IEC60529 IP3X / IEC 61032-1 Figure 3 Test Rod For Testing Easily Accessible Live Parts Or Mechanical Parts Description: This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a tool. Confirm to standard... Mehr sehen
➤ Besuch Webseite
Abbildung 17 Iecs 61032 Stange 43 des Prüfen-Finger-B für das Überprüfen des Schutzes
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:IEC 61032 Test Finger, IEC60335 Test Bar, IEC 61032 Test Probe B
IEC61032 Figure 17 Test Bar 43 For Verifying Protection Of Visibly Glowing Radiant Heater Product information: This test bar 43 confirms to the IEC61032 figure 17 and IEC60335 standard requirements. It is used for testing the protection of thermal radiation heaters which are fixed or portable visibl... Mehr sehen
➤ Besuch Webseite
Prüfungssonde Pin For Scratch Resistance Prüfen der elektrischen Sicherheits-IEC60335
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:IEC60335 Electrical Safety Testing Probe, Scratched Pin Testing Probe, IEC60335 Threaded Taper Pin
IEC60335-1 Clause 21 Scratched Pin For Scratch Resistance Test Of The Electrical Solid Insulation Surface Product information: The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21. Test metho... Mehr sehen
➤ Besuch Webseite
Ф30mm-Edelstahl-Schub Rod IEC60884 1 2002 IEC60950 1 2005
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:Ф30mm Stainless Steel Thrust Rod, Ф30mm Terminal Probe, IEC60950 Test Rod Probe
IEC60884-1-2002 / IEC60950-1-2005 Stainless Steel Thrust Rod Product information: Thrust rod is according to the standards of IEC60884.1-2002 and IEC60950.1-2005 to manufacture. Test method: Touch the specimen by the thrust rod terminal, and then push the handle to the scale mark keeping 1min (5s). ... Mehr sehen
➤ Besuch Webseite
Φ5*0.5mm-Oberflächentemperaturfühler-Sensor IEC60335 2 11 Abbildung 104
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:Φ5*0.5mm Surface Temperature Probe, IEC60335 Surface Temperature Probe, Φ5*0.5mm Surface Temperature Sensor
IEC60335-2-11 Figure 104 Surface Temperature Probe For Temperature Rise Measurement On The Front Surface Product information: This probe conforms to the IEC60335-2-11 figure 104 and IEC60335-2-6-2002 figure 104 standard requirements. It is mainly used to measure the temperature rise on the front sur... Mehr sehen
➤ Besuch Webseite
Dreieck-Prüfen-Sonde Kit Nylon Stainless Steel Material des Abb. 10,3-Ul1278
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:Ul1278 Triangle Test Probe, Fig 10.3 Triangle Test Probe, Ul1278 Test Probe Kit
Ul1278 Figure 10.3 Triangle Test Probe Product details: It conforms to standard requirement of UL1278 Fig 10.3. The handle is made of nylon and the probe is made of stainless steel. Standard:UL1278 Fig 10.3. Application:The heating element and any part of the element assembly (such as an element sup... Mehr sehen
➤ Besuch Webseite
Messer-Sonde des Abbildung 3-UL749 für Haushalts-Spülmaschine Protective Prüfen
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:UL749 Knife Probe, UL749 Probe Knife, UL749 Test Thorn Probe
ing Product details: It conforms to standard requirement of UL749 Fig 3(SB0504A). It is a dedicated instrument for household dishwasher protective testing. It is an essential test instrument to detect the safety performance of the relevant home appliance products. The handle is made of Nylon and the... Mehr sehen
➤ Besuch Webseite
Standardder Prüfen-Sonden-B Klausel IEC60335 2 14 20,2 Finger-der Längen-100mm
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:IEC60335 Test Probe B, 100mm Standard Test Finger, 100mm Test Probe B
IEC60335-2-14 Clause 20.2. Test Finger B Product Details Standard description: For blenders, detachable parts, except lids, are not removed. The test is carried out with a test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the... Mehr sehen
➤ Besuch Webseite
Gegliederte Finger-Standardsonde ULs für Einschließungs-Schutz-Prüfen
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:UL Standard Articulated Finger Probe, Enclosure Articulated Finger Probe, Articulated UL Test Finger
Of The Electrical Equipment Product information: The UL accessibility probe is also called UL articulated probe or jointed test finger probe. It conforms to many standard requirement of UL474 Fig 5.1, UL507 Fig 9.2(PA100A), UL982 Fig 7.1, UL1017 Fig 2, UL1062 Fig1.2, UL1278Fig 8.3, UL1310 Fig 16.2, ... Mehr sehen
➤ Besuch Webseite
Abbildung 2-erwachsene Arm-Sonde en 50636-2-100
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Product Details Product information: The adult arm probe conforms to EN 50636-2-100 figure 2 and EN13683-2003: 5.2.1.3 fig 5. It is used to simulate the adult to test whether the hazardous parts can be touched. Customizable: It can be used for anti-electric shock test when equipped with amphenol con... Mehr sehen
➤ Besuch Webseite
Prüfen-Sonde 12 des Abbildung 8-IEC61032
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Product Details Product information: This pin is intended to be used on appliances for verifying the inaccessibility of hazardous live parts or hazardous mechanical parts which are liable to be touched accidentally by a tool, for example a screwdriver or similar pointed object in normal use. It meet... Mehr sehen
➤ Besuch Webseite
Abbildung 15 des Prüfen-IEC61032 der Sonden-32
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Product Details Product information: The test rod probe confirms to IEC61032 figure 15 requirements. It is intended to verify the protection provided by fan guards against access to hazardous mechanical parts. It is equipped with nylon handle. Customizable: It is used for enclosure protection test w... Mehr sehen
➤ Besuch Webseite
Flache kegelförmige Prüfen-Finger-Sonde Hand-ULs 60335 mit einem Mittelbolzen
Preis: To be quoted
MOQ: 1
Lieferzeit: 3~15 working days
Marke: KingPo
Markieren:UL 60335 Test Finger Probe, Center Pin Test Finger Probe, UL 60335 Articulate Probe
UL 60335-2-24 Figure 101.DVA.2 Articulate Probe With Flat And Cone Shaped Hand 10.5 – 11.5 Year Age Notes: 1 – The probes were designed with a center pin to rotate the hand with respect to the lower arm. That motion can be equivalently represented by rotating the probe. 2 – The finger ″tip″ is devel... Mehr sehen
➤ Besuch Webseite