...
>
Testgerät Iecs 62368
(71)
Iecs 62368-1 des Klausel-5.4.2 Innenwiderstände 12.5KV Antrieb-Spannungs-Generator-2
Preis: Negotiable
MOQ: 1
Lieferzeit: 20 Days
Marke: Sinuo
Markieren:Clause 5.4.2 Impulse Voltages Generator, IEC 62368-1 Impulse Voltages Generator, 12.5kV Impulse Voltages Generator
IEC 62368-1 Clause 5.4.2 Impulse Voltages Generator 2 Internal Resistances 12.5KV Product information: Standard: Conform to IEC 62368-1:2018 clause 5.4.2,5.5.8 and Annex D, circuit 1 and circuit 2 of Table D.1, Annex G.10, etc., IEC 60950-1:2013 clause 2.10.3.9, 5.2, reference 2 of table N.1, IEC 60... Mehr sehen
➤ Besuch Webseite
Antrieb-Spannungs-Prüfeinrichtung 1,2 Iecs 62368-1 der Klausel-5.4.2 integrierte /50-µs 10/700 µs
Preis: Negotiable
MOQ: 1
Lieferzeit: 20 Days
Marke: Sinuo
Markieren:Integrated Impulse Voltage Test Apparatus, Clause 5.4.2 Voltage Test Apparatus, IEC 62368-1 Voltage Test Apparatus
IEC 62368-1 Clause 5.4.2 Integrated Impulse Voltage Test Apparatus 1.2 /50 µs 10/700 µs Product information: The Integrated Impulse Voltage Test Apparatus conforms to the standards of IEC 62368-1:2018 clause 5.4.2,5.5.8 and Annex D, circuit 1 and circuit 2 of Table D.1, Annex G.10, etc., IEC 60950-1... Mehr sehen
➤ Besuch Webseite
Anhang H 5000 Iecs 62368-1 Klausel-5.4.11 Ω nicht- induktiver Widerstand
Preis: Negotiable
MOQ: 1
Lieferzeit: 10 Days
Marke: Sinuo
Markieren:IEC 62368-1 Non - Inductive Resistor, Annex H Non - Inductive Resistor, Clause 5.4.11 Non - Inductive Resistor
IEC 62368-1 Clause 5.4.11 Annex H 5000 Ω Non-inductive Resistor Product Information: This 5000Ω non-inductive resistor, category: wire-wound resistors. It is designed and manufactured according the standard requirements of IEC 62368-1:2018 clause 5.4.11 and Annex H, IEC 60065-1:2014 clause 7. It is ... Mehr sehen
➤ Besuch Webseite
Nadel-Flammen-Prüfmethode-Feuergefahr-Prüfeinrichtung Iecs 62368-1 Anhang-S
Preis: Negotiable
MOQ: 1
Lieferzeit: 30 Days
Marke: Sinuo
Markieren:IEC 62368-1 Fire Hazard Testing Apparatus, Annex S Fire Hazard Testing Apparatus, PLC Fire Hazard Testing Apparatus
IEC 62368-1 Annex S Needle-flame Test Method Fire Hazard Testing Apparatus Product Information: The Needle-flame Test Method Fire Hazard Testing Apparatus is designed and manufactured according to the standard requirements of IEC 62368-1 Annex S, IEC60335-1 clause 30.2, Annex E, etc. It consists of ... Mehr sehen
➤ Besuch Webseite
ENTFLAMMBARKEITS-Test-Kammer PLC-Steuerung Iecs 62368-1 Klausel-5.4.3 CTI PTI Spurhaltungs
Preis: Negotiable
MOQ: 1
Lieferzeit: 30 Days
Marke: Sinuo
Markieren:PTI Tracking Flammability Test Chamber, PLC Flammability Test Chamber, IEC 62368-1 Flammability Test Chamber
IEC 62368-1 Clause 5.4.3 CTI PTI Tracking Flammability Test Chamber PLC Control Product Information: The Tracking Flammability Test Chamber is designed and manufactured according to the standard requirements of IEC 62368-1:2018 clause 5.4.3, IEC 60335-1 clause 29.2, Annex N, IEC 60112, etc. It is us... Mehr sehen
➤ Besuch Webseite
Klausel Y.2 und Xenon-Verwitterungs-Test-Kammer Iec 62368-1 des Anhang-C wassergekühlter
Preis: Negotiable
MOQ: 1
Lieferzeit: 30 Days
Marke: Sinuo
Markieren:Water Cooled Xenon Weathering Test Chamber, IEC 62368-1 Xenon Weathering Test Chamber, Clause Y.2 Xenon Weathering Test Chamber
IEC 62368-1 Clause Y.2 and Annex C Water-Cooled Xenon Weathering Test Chamber Product Information: This Water-Cooled Xenon Weathering Test Chamber is designed and manufactured according to the standard requirements of IEC 62368-1:2018 clause Y.2 and Annex C, etc. It is with imported Q-LAB water-cool... Mehr sehen
➤ Besuch Webseite
Klausel-Anhang S Iecs 62368-1 horizontale und vertikale brennende Prüfeinrichtung
Preis: Negotiable
MOQ: 1
Lieferzeit: 30 Days
Marke: Sinuo
Markieren:Vertical Burning Test Apparatus, Annex S Burning Test Apparatus, IEC 62368-1 Burning Test Apparatus
IEC 62368-1Clause Annex S Horizontal And Vertical Burning Test Apparatus Product Information:This test apparatus is designed and manufactured according to the standard requirements of IEC 62368-1:2018 Annex S, IEC 60950:2013 clause 4.7.3, IEC60065:2014 clause 14.1, 20.2.1, 20.2.4, Annex G, IEC60335-... Mehr sehen
➤ Besuch Webseite
Anhang S Iecs 62368-1 horizontale und vertikale brennende Prüfeinrichtung
Preis: Negotiable
MOQ: 1
Lieferzeit: 30 Days
Marke: Sinuo
Markieren:IEC 62368-1 Burning Test Apparatus, Horizontal Burning Test Apparatus, Annex S Burning Test Apparatus
IEC 62368-1 Annex S Horizontal and Vertical Burning Test Apparatus Product information: The Horizontal and Vertical Burning Test Apparatus is required by IEC 62368-1:2018 Annex S, IEC 60950:2013 clause 4.7.3, IEC60065:2014 clause 14.1, 20.2.1, 20.2.4, Annex G, IEC60335-1 clause 30, etc. It is also a... Mehr sehen
➤ Besuch Webseite
Klausel5.4.1.10 Vicat Iecs 62368-1 Erweichungstemperatur-Bestimmungs-Prüfvorrichtung
Preis: Negotiable
MOQ: 1
Lieferzeit: 20 Days
Marke: Sinuo
Markieren:Vicat Softening Temperature Determination Tester, IEC 62368-1 Temperature Determination Tester, Clause 5.4.1.10 Temperature Determination Tester
IEC 62368-1 Clause 5.4.1.10 Vicat Softening Temperature Determination Tester Product Information: This test apparatus designed and manufactured according to the standard of IEC60065:2014 clause 7.2 and table 3, ISO75-1, ISO306. It is mainly used for the determination of thermal deformation temperatu... Mehr sehen
➤ Besuch Webseite
KABEL-Biegeprüfungs-Apparat-Iec 62368-1 des Klausel-Anhang-G.7 Gummi
Preis: Negotiable
MOQ: 1
Lieferzeit: 30 Days
Marke: Sinuo
Markieren:Rubber Cables Flexing Test Apparatus, IEC 62368-1 Cables Flexing Test Apparatus, Annex G.7 Cables Flexing Test Apparatus
IEC 62368-1 Clause Annex G.7 Rubber Cables Flexing Test Apparatus Product Infromation: The Rubber Cables Flexing Test Apparatus is designed and manufactured according to standard IEC 62368-1:2018 clause Annex G.7, IEC60065:2014 clause 16.3 b), IEC60227-2 clause 3.1 Figure 1 and etc. It complies with... Mehr sehen
➤ Besuch Webseite
Klausel Y.5 IPX3 zum Wasser IPX6 sprühen Prüfeinrichtung Iec 62368-1
Preis: Negotiable
MOQ: 1
Lieferzeit: 30 Days
Marke: Sinuo
Markieren:IPX6 Water Spray Test Apparatus, Clause Y.5 Water Spray Test Apparatus, IEC 62368-1 Water Spray Test Apparatus
IEC 62368-1 Clause Y.5 IPX3 to IPX6 Water Spray Test Apparatus Product information: The testing system is required by IEC 62368-1:2018 clause Y.5, etc. It is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household ap... Mehr sehen
➤ Besuch Webseite
Salznebel-Salz-Nebel-Nebel-Korrosions-Test-Kammer Iecs 62368-1 programmierbare
Preis: Negotiable
MOQ: 1
Lieferzeit: 30 Days
Marke: Sinuo
Markieren:Programmable Mist Fog Corrosion Test Chamber, IEC 60068-2-11 Fog Corrosion Test Chamber
IEC 60068-2-11Programmable Salt Spray Salt Mist Fog Corrosion Test Chamber Product Information: This test chamber conforms to standards of IEC60068-2-11, it is required by IEC 62368-1:2018 clause Y.3. It is used to verify the corrosion resistance of iron metal or the iron metal inorganic film or org... Mehr sehen
➤ Besuch Webseite
UVverwitterungsbeschleunigter alternder Test-Kammer Iec 62368-1 der Klausel-10
Preis: Negotiable
MOQ: 1
Lieferzeit: 30 Days
Marke: Sinuo
Markieren:UV Weathering Accelerated Ageing Test Chamber, Clause 10 Accelerated Ageing Test Chamber, IEC 62368-1 Ageing Test Chamber
IEC 62368-1 Clause 10 UV Weathering Accelerated Ageing Test Chamber Product Information:The UV Weathering Resistance Test Chamber is designed and manufactured according to the standard requirements of IEC 62368-1:2018 clause 10. It is mainly used for artificial accelerated tests of plastics, coating... Mehr sehen
➤ Besuch Webseite
Klausel 5.4.1.5 Iecs 62368-1 .3 Wärmeschrank für Ball-Druckprüfung
Preis: Negotiable
MOQ: 1
Lieferzeit: 30 Days
Marke: Sinuo
Markieren:IEC 62368-1 Heating Chamber, Ball Pressure Test Heating Chamber, Clause 5.4.1.5.3 Heating Chamber
IEC 62368-1 Clause 5.4.1.5.3 Heating Chamber for Ball Pressure Test Product information: This heating chamber is required by IEC 62368-1:2018 clause 5.4.1.5.3, 5.4.1.10, Annex G.5.3.4, Annex G.13.6.2, Annex M.4.2, M.4.4.4, Annex. P.4, Annex T.8, IEC60950:2013 clause 2.10.8.2, clause 4.2.7, clause 4.... Mehr sehen
➤ Besuch Webseite
Dehnfestigkeits-und Verlängerungs-Prüfeinrichtung Iecs 62368-1 Klausel-Y.4.3
Preis: Negotiable
MOQ: 1
Lieferzeit: 15 Days
Marke: Sinuo
Markieren:IEC 62368-1 Elongation Test Apparatus, Annex G.5 Elongation Test Apparatus, Tensile Strength Elongation Test Apparatus
IEC 62368-1 Clause Y.4.3 Tensile Strength And Elongation Test Apparatus Product information: This Tensile Strength and Elongation Test Apparatus is designed and manufactured according to the standard requirement of IEC 62368-1:2018 Annex C, Annex G.5, clause Y.4.3, etc. It is used to test the deteri... Mehr sehen
➤ Besuch Webseite
Klausel 5.4.1.5 Iecs 62368-1 .3 Isolierungs-Oberflächen-Kratzfestigkeits-Prüfeinrichtung
Preis: Negotiable
MOQ: 1
Lieferzeit: 30 Days
Marke: Sinuo
Markieren:Insulation Surface Scratch Resistance Test Apparatus, IEC 62368-1 Scratch Resistance Test Apparatus, Clause 5.4.1.5.3 Scratch Resistance Test Apparatus
IEC 62368-1 Clause 5.4.1.5.3 Insulation Surface Scratch Resistance Test Apparatus Production Information: This Insulation Surface Scratch Resistance Test Apparatus meets the requirements of IEC 62368-1 clause 5.4.1.5.3, IEC 60335-2-78:31; IEC 60335-2-95:31; IEC 60335-2-97:31; IEC 60335-2-103:31; IEC... Mehr sehen
➤ Besuch Webseite
Stromkreis 3 Iecs 62368-1 Klausel-5.4.2 Anstiegs-Test-des Generators 10KV der Tabellen-D.1
Preis: Negotiable
MOQ: 1
Lieferzeit: 15 Days
Marke: Sinuo
Markieren:10KV Surge Test Generator, IEC 62368-1 Surge Test Generator, Clause 5.4.2 Surge Test Generator
IEC 62368-1 Clause 5.4.2, 5.5.8, Annex D Circuit 3 of Table D.1 Surge Test Generator 10KV Product Information: This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:2013 clause 7.4.2, reference 3 of table N.1, IE... Mehr sehen
➤ Besuch Webseite
Zahl V.5-Terminalsonde 20mm±0.2 Millimeter Iecs 62368-1 Klausel-V.1.6
Preis: Negotiable
MOQ: 1
Lieferzeit: 10 Days
Marke: Sinuo
Markieren:Figure V.5 Terminal Probe, IEC 62368-1 Terminal Probe, Clause V.1.6 Terminal Probe
IEC 62368-1 Clause V.1.6 Figure V.5 Terminal Probe 20mm±0.2 mm Product information: Standard:IEC 62368-1:2018 clause V.1.6 and figure V.5 (but with probe length 20mm±0.2 mm), etc. Application:This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also... Mehr sehen
➤ Besuch Webseite
Stecker-Drehmoment-Kraft-Prüfeinrichtung 0,25 u. 0,4 Iecs 62368-1 Klausel-4,7 N.M
Preis: Negotiable
MOQ: 1
Lieferzeit: 15 Days
Marke: Sinuo
Markieren:Plug Torque Force Test Apparatus, IEC 62368-1 Force Test Apparatus, Clause 4.7 Force Test Apparatus
IEC 62368-1 Clause 4.7 Plug Torque Force Test Apparatus 0.25 & 0.4 N.M Product information: This device can measure the torque of the plug inserted into the socket according to the standard of IEC 62368-1:2018 clause 4.7, IEC60065: 2014 clause 15.4.1 and figure 11, IEC 60884-1 2013 clause 14.23.... Mehr sehen
➤ Besuch Webseite
IEC 62368-1 Abschnitt Anhang G.15 42 MPa Hydrostatisches Druckprüfsystem
Preis: Negotiable
MOQ: 1
Lieferzeit: 30 Days
Marke: Sinuo
Markieren:2.5Mpa Hydrostatic Pressure Test System, Annex G.15 Hydrostatic Pressure Test System, IEC 62368-1 Hydrostatic Pressure Test System
IEC 62368-1 Clause Annex G.15 2.5Mpa Hydrostatic Pressure Test System Product Information: This hydraulic pressure test apparatus is designed and manufactured according to the standard requirements of IEC 62368-1 clause Annex G.15, IEC 60335-1 clause 22.47, IEC 60335-2-5 cl.22.101, IEC 60335-2-7 cl.... Mehr sehen
➤ Besuch Webseite