...
>
Manuelles Keratometer
(4)
Spaltlampe manuelles Keratometer für messenden Diopter und Biegung
Preis: Negotiable
MOQ: Negotiable
Lieferzeit: Negotiable
Marke: 66 VISION
Markieren:b&l keratometer manual, manual keratometry measurements
Slit Lamp Microscope YZ38 Keratometer The product is used to measure diopter and curvature of cornea surface and the axis and diopter of cornea astigmatism. It can also used to measure the diopter of IOL assisted by A ultrasonic. Specifications Measuring Range Curvature Radius 5.511mm Diopter 30~60D... Mehr sehen
➤ Besuch Webseite
Diopter manuellen Keratometer-Messbereich-Biegungs-Radius 5.5-11mm messend
Preis: Negotiable
MOQ: 1 Set
Lieferzeit: Negotiable
Marke: 66 VISION
Markieren:Diopter Measuring Manual Keratometer, Radius 11mm Manual Keratometer, Radius 5.5mm Manual Keratometer
Diopter Measuring Manual Keratometer Measuring Range Curvature Radius 5.5 - 11mm 1, Description: The product is applied in measuring diopter on the surface of cornea, and the axis and diopter of cornea astigmatism. It can measure the diopter of implanting lens assisted by A ultrasonic. 2, Specificat... Mehr sehen
➤ Besuch Webseite
Diopter manuellen Keratometer-Messbereich-Biegungs-Radius 5.511mm messend
Preis: Negotiable
MOQ: 1 Set
Lieferzeit: Negotiable
Marke: 66 VISION
Markieren:b&l keratometer manual, bausch and lomb keratometer manual
The product is applied in measuring diopter on the surface of cornea, and the axis and diopter of cornea astigmatism. It can measure the diopter of implanting lens assisted by A ultrasonic. Specifications: Measuring Range Curvature Radius 5.511mm Diopter 30~60D Minimum Division Radius 0.02mm Diopter... Mehr sehen
➤ Besuch Webseite
YZ38 manueller Keratometer Messbereich des Biegungs-Radius-5.5-11mm
Preis: Negotiable
MOQ: Negotiable
Lieferzeit: Negotiable
Marke: 66 VISION
Markieren:bausch and lomb keratometer manual, manual keratometry measurements
YZ38 Keratometer Specifications: Measuring Range Curvature Radius 5.5—11mm Diopter 30—60D Minimum Division Radius 0.02mm Diopter 0.25D Minimum Surface Area Required by Measurement r=5.5mm 1.65mm r=7.5mm 2.36mm r=11mm 3.36mm Mehr sehen
➤ Besuch Webseite