...
>
DTH-Hämmer
(122)Atlas Copco Hämmer die 4 Zoll-DTH, die hinunter Loch bohren, hämmert Goldenes für Hardrock-Bergbau
Preis: negotiation
MOQ: 50 Pieces
Lieferzeit: 10-25days
Marke: MIROC
Markieren:down the hole drilling tools, down the hole hammer
Down Hole Hammers Golden For Hard Rock Mining 4 Inch DTH Hammers Drilling Describtion In DTH hammers, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH ha... Mehr sehen
➤ Besuch Webseite
Hämmer DHD112 SD12 NUMA120 12 Zoll-DTH für das Bergbau und Wasser-Brunnenbohrung
Preis: USD 50-1600 pieces
MOQ: 1 piece
Lieferzeit: 1-15 days
Marke: MIROC
Markieren:down hole hammer, down the hole hammer
12 inch DTH hammer DHD112, SD12 and NUMA120 for mining and water well drilling FEATURES With professional manufacturing experience in DTH hammer production, our factory can supply you with high pressure and medium to low pressure DTH hammers. It strictly matches with API standard and other Chinese i... Mehr sehen
➤ Besuch Webseite
Hämmer des Wasser-Brunnen-Bohrgerät-DTH durch Rückhammer der zirkulations-DTH
Preis: negotiation
MOQ: 50
Lieferzeit: 25 days
Marke: MIROC
Markieren:down the hole drilling tools, down the hole hammer
High Air Pressure Water Well Drilling Without Foot Valve DTH Hammer Description In DTH hammers, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH hammers ... Mehr sehen
➤ Besuch Webseite
Niedrige Luftdruck-/hoch des Luftdruck-DTH Hämmer und Stückchen DTH380 1550mm
Preis: USD 50-1600 pieces
MOQ: 1 piece
Lieferzeit: 1-15 days
Marke: MIROC
Markieren:down hole hammer, down the hole hammer
DTH380 1550mm Low Air Pressure / High Air Pressure DTH Hammers and Bits In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling a near... Mehr sehen
➤ Besuch Webseite
Durch Rückhammer-Stückchen der zirkulations-DTH 5" RE040/RE542/RE545
Preis: negotiation
MOQ: 1 piece
Lieferzeit: 1-20 days
Marke: MIROC
Markieren:down the hole drilling tools, down hole hammer
5" RE040 / RE542 / RE545 Through Reverse Circulation Downhole Hammer DTH Hammer And Bits In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This giv... Mehr sehen
➤ Besuch Webseite
4-Zoll hoher Luftdruck DTH hämmert Grün für COP44-/DHD340Aschaft
Preis: negotiation
MOQ: 1 Piece DTH Hammer
Lieferzeit: 25 days
Marke: MIROC
Markieren:down hole hammer, down the hole hammer
4 Inch For COP44/DHD340A Shank High Air Pressure DTH Hammers In DTH hammers, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH hammers a nearly constant p... Mehr sehen
➤ Besuch Webseite
Valveless Abstieg die Loch-Bohrgeräte 8 Zoll mit hoher leistungsfähiger Energie-Übertragung
Preis: Negotiation
MOQ: 1 Piece DTH Hammer
Lieferzeit: 10-15 Days
Marke: MIROC Rock Drilling Tools
Markieren:down the hole drilling tools, down the hole hammer
Valveless Down The Hole Drilling Tools 8 Inch With High Efficient Energy Transfer Dth Hammer In DTH hammers, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives... Mehr sehen
➤ Besuch Webseite
Niederdruck hinunter den Loch-Hammer CIR65/70 für Brunnenbohrung
Preis: Negotiation
MOQ: 1 Piece CIR90 DTH Hammer
Lieferzeit: 25 days
Marke: MIROC
Markieren:down hole hammer, down the hole hammer
Low Pressure Down The Hole Hammer CIR65 / 70 For Well Drilling Products Parameters: 1.high and low air pressure down-the-hole drill bits 2.Low air pressure hole Dia.:65-220mm 3.High air pressure hole Dia.:85-305mm 4.Face type: drop center bit/concave face/convex face/double gauge face/flat face bit ... Mehr sehen
➤ Besuch Webseite
CIR90 hinunter Loch-Hammer mit niedrigem Luftdruck für geologische Hämmer der Bohrungs-DTH
Preis: Negotiation
MOQ: 1 Piece CIR90 DTH Hammer
Lieferzeit: 25 days
Marke: MIROC
Markieren:down hole hammer, down the hole hammer
CIR90 DTH Hammer with low air pressure 0.5-0.7MPa Geological Drilling DTH Hammers Specification: standard type, no foot valve length: 800mm external diameter: 80mm, drilling hole range: 85mm-110mm, working pressure: 0.5-0.7MPa, air consumption: 0.7MPa 8m³/min weight: around 20kg Drilling Diameter(mm... Mehr sehen
➤ Besuch Webseite
3,5-Zoll hoher Luftdruck DHD für Erz-Bohrung hinunter die Hämmer des Loch-DTH
Preis: Negotiated price
MOQ: 1pcs
Lieferzeit: 5-15 working day
Marke: MIROC
Markieren:down the hole drilling tools, down hole hammer
DHD 3.5 Inch High Air Pressure For Ore Drilling Down The Hole DTH Hammers Application: The down-the-hole drilling tool is used to drill large-diameter holes in rocks, usually in the initial stage prior to blasting, but it is also used in non-blasting application. DTH drilling are used mostly in mini... Mehr sehen
➤ Besuch Webseite
4-Zoll hoher Luftdruck DTH hämmert/hinunter das Loch 1097mm QL40 für Wasser-Brunnen
Preis: Negotiable
MOQ: Negotiable
Lieferzeit: 10 - 20 days
Marke: MIROC (KSQ)
Markieren:down the hole drilling tools, down the hole hammer
Down The Hole 1097mm QL40 For Water Well 4 Inch High Air Pressure DTH Hammers Description: In DTH hammers, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives D... Mehr sehen
➤ Besuch Webseite
Bergwerksbetrieb hinunter den Stangen-Funktions-Druck der Loch-Bohrgerät-DHD3.5 Längen-7 - 25
Preis: Negotiable
MOQ: 5 Pieces
Lieferzeit: 10 - 15 days
Marke: KSQ MIROC
Markieren:down hole hammer, down the hole hammer
Hole Range Ф90mm-Ф110mm API 2 3/8" Reg DHD3.5 Down The Hole Drilling Tools DTH Hammer Description: For efficient down-the-hole (DTH) drilling, KSQ Technologies offers high performance drilling tools to increase your productivity and reduce your total operation cost. KSQ Technologies develops to... Mehr sehen
➤ Besuch Webseite
Hinunter die des Loch-DTH Reihe Hammer-Bergbau-Wasser-der Brunnenbohrungs-QL 1097mm - 1465mm Länge
Preis: Negotiation
MOQ: 1 Piece DTH Hammer
Lieferzeit: 10-15 Days
Marke: MIROC DTH Rock Drilling Tools
Markieren:down hole hammer, down the hole hammer
QL50 Down The Hole Mining Water Well Drilling DTH Hammer KSQ Down The Hole drill bit s are produced from premium quality alloy steel for increased durability and wear characteristics. Specific heat treatment standards and special "stress relief" processes ensure consistent performance. KSQ... Mehr sehen
➤ Besuch Webseite
Hoher Luftdruck-bohrender Stahlhammer für Wasser-Brunnen und geothermische Bohrlöcher
MOQ: 1 piece
Lieferzeit: 1-15 days
Marke: MIROC
Markieren:down hole hammer, down the hole hammer
DHD380 High Air Pressure Steel Drilling For Water Well And Geothermal Boreholes DTH Hammer FEATURES MIROC offers one of the most complete lines of down the hole drills and downhole bits ranging from 3.5” – 36” (89mm – 914mm) which are designed for peak performance in all rock drilling applications i... Mehr sehen
➤ Besuch Webseite
Hochleistung Hämmer 10 Zoll-DTH für Öl und Gas Underbalanced-Bohrung
MOQ: 1 piece
Lieferzeit: 1-15 days
Marke: MIROC
Markieren:down hole hammer, down the hole hammer
High Performance 10 Inch For Oil And Gas Underbalanced Drilling DTH Hammers FEATURES MIROC offers one of the most complete lines of down the hole drills and downhole bits ranging from 3.5” – 36” (89mm – 914mm) which are designed for peak performance in all rock drilling applications including but no... Mehr sehen
➤ Besuch Webseite
mittlere niedrige Hämmer des 0.7Mpa-1.75Mpa Luftdruck-DTH für das Abbauen
Preis: Negotiation
MOQ: 1 Piece DTH Hammer
Lieferzeit: 10-15 Days
Marke: MIROC Rock Drilling Tools
Markieren:0.7Mpa DTH Hammers, 1.75Mpa DTH Hammers, Quarrying DTH Hammers
0.7Mpa~1.75Mpa Middle-Low Air Pressure DTH Hammers Features BR1,BR2 and BR3 series DTH Hammers are designed to operate efficiently at low air pressure and medium air pressure, using BR series bits. The main features are as following: 1.The operating air prussure are between 0.7 MPa and 1.75Mpa. 2.Va... Mehr sehen
➤ Besuch Webseite
3" Hammer Remet-Faden-Re531 Rc für Erforschungs-Bohrung
Preis: Negotiation
MOQ: 1 Piece Reverse Circulation DTH hammer
Lieferzeit: 10-15 Days
Marke: MIROC DTH Drilling Tools
Markieren:re531, exploration drilling rc hammer, 3" remet thread rc hammer
3" Remet Thread RE531 For Exploration Drilling DTH Hammer RC hammers are essentially the same as conventional DTH hammers, but with an inner-tube that runs through the centre of the entire hammer. The cuttings are collected in the holes in the front of the bit and confined and transported in th... Mehr sehen
➤ Besuch Webseite
Niedriger CIR76 Luftdruck-Kohlenstoffstahl hinunter das Loch-Hammerbohren
Preis: Negotiation
MOQ: 1
Lieferzeit: 15-20 days
Marke: MIROC
Markieren:CIR76 down the hole hammer drilling, carbon steel dth hammer drilling, carbon down the hole hammer drilling
CIR76 Low Air Pressure Carbon Steel Down The Hole Hammer Drilling DTH Hammers All the products are manufactured as per the international standard and well compatible with the brand of Atlas Copco, Ingersoll-Rand, etc Main Features 1) DTH hammers series we supply A) High pressure series B) Medium pre... Mehr sehen
➤ Besuch Webseite
Hinunter die Hämmer des Loch-DTH
Preis: negotiation
MOQ: 50
Lieferzeit: 25 days
Marke: MIROC
Markieren:down the hole drilling tools, down the hole hammer
Air Pressure Mining Well Drilling Tools Down The Hole DTH Hammers Description In DTH hammers, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH hammers a ... Mehr sehen
➤ Besuch Webseite
Niedriger Luftdruck Downhole-Bohrgerät-Atlas copco dth Hammer
Preis: negotiation
MOQ: 1pcs
Lieferzeit: 15-20days
Marke: MIROC
Markieren:down hole hammer, down the hole hammer
BR1 BR2 BR3 Middle Low Air Pressure Down Hole Drilling Tools Dth Hammer Applications 1. Underground mining 2. Quarry benching operations 3. Water well drilling Middle-Low Air Pressure DTH Hammer The Characteristics of Middle-Low Air Pressure DTH Hammers Features: KBR1A, KBR2A and KBR3A series DTH ha... Mehr sehen
➤ Besuch Webseite